When you are riding in a group, it can be hard to distinguish between riders. And besides being able to tell each other apart, a helmet Mohawk is a bit of fun. Some of these Mohawks are removable — others are part of the helmet.
Depending on whether you are a weekend rider that wants to break from their day to day look. Or for kids that want to join in with the ride — the best motorcycle Mohawks should be fun, convenient, and safe.
Here’s our guide to the best motorcycle helmet mohawks you can buy, we’re sure one will take your fancy.
- Meets CPSC standards and ASTM standards
- Ages 5 and up, Fits Heads 50-54cm
- Recommended for kids 3+, but will fit most heads measuring 48-52cm. Head sizes and shapes can vary, even within an age range. ALWAYS take a head measurement before purchase.
- The vented, aerodynamic styling allows for great velocity and a comfortable level of airflow
- At Raskullz, we live by one simple belief: Protect the Head-- Inspire the Imagination
Kids want their chance to look cool on their bikes too, and now they can. Raskullz meets the requirements set out by the CPSC and the ASTM to provide safety for your child while they have fun on their bikes. The helmet has an adjustable clip buckle so that it is easy to secure and remove. Impact protection comes from the thick EPS foam inner-shell.
For ages 3+ and 5+.
Adjustable buckle chin strap.
There is a soft foam that lifts the helmet away from the wearer’s skull to prevent sweat build-up. The helmet also has vents with holes in the rear and on the top, which supplies decent airflow. Curved shaping of the helmet also helps to encourage ventilation and reduces air-resistance.
Raskullz offers an enormous number of shell-colors to choose from and Mohawks to match. The Mohawk is TPR (Thermoplastic rubber), so it will flex in an impact, but it will appear rigid at low speeds. The production of these helmets is under the control of Bell Helmets, so you know that you are getting something safe.
Soft rubber Mohawk.
Adjustable chin strap.
Range of colors.
Not rated for motorcycle use.
No washable liner.
- Easy to apply. Adheres with strong 3M tape
- Made out of rubber. Extremely durable.
- Warhawk can be cut shorter for smaller helmets
- 15 blades (approximately 15.75 inches total length)
- Made in the USA
This is a customizable Warhawk made from durable rubber. And for those that want to see how fast they can go before the Mohawk disappears, the Taylor33™ is a good place to start. The manufacturer claims that the adhesive will hold at speeds of 200 miles per hour.
There are 15 blades on this Mohawk, set out in a saw design to give an aggressive look to a helmet. These are in black, but it would be easy to paint them. The fins have 3M™ adhesive tape that runs the base of the Mohawk, which is fine for a single application, and it is removable. But you cannot attach and remove them more than once, unlike Velcro strips.
The fins are easy to cut to length for different sized helmets. Or you can mix up the orientation of the fins, and their positions. Total length is a little under 17 inches, so it will cover most helmets from front to back. You can paint this mohawk, but the manufacturer also makes reflective decals of various colors, if you want it to make a real statement. Perfect to make your badass helmet even more menacing.
3M adhesive, pre-applied.
Durable rubber fins.
One choice of color, though you can paint or decal the fins.
One opportunity to attach and remove the Mohawk with the same adhesive.
- You Get: 1*Pink Helmet Mohawk
- Size: 12inch*Length ,3.5inch*Height
- Advantage: Hook and Loop Design will hold up to 200 mph and reusable ; DIY Cut Length or Color as you need
- Application: motorcycle helmet, bicycle helmet,motocross helmets and any places you want to try
- Delivery: Ship out from US Warehouse, fast delivery
Hai Hong has gone for the softer look and made their Mohawks easier to remove. The fin is a plush synthetic hair, which will move in the wind giving them some dimension. And because they are fabric, you can trim them to different lengths to better suit the look you are going for.
Hook and loop attachment, like Velcro.
Soft, flexible fabric.
15 colors to choose from.
12 inches long, 3.5 inches wide.
The underside of the strip is sewn to a hook-strip, so it is flexible and will twist up to a point. In this way, the hook-strip can stick to the helmet, and the Mohawk is quick and easy to remove without removing the glue.
A fabric Mohawk is also easy to cut to length or place section in different orientations around the helmet. You can also mix and match colors — there are 15 colors to choose from, and all will stick to the same base strip. The manufacture claims that this hook and loop design will withstand speeds of up to 200 miles per hour.
A range of colors to choose from.
Removable Mohawk, which is quick to reattach.
Soft fabric that will not interfere with the safety of a helmet.
Flexible easy to bend around a helmet.
The base strip stays on the helmet when you remove the Mohawk.
Soft fabrics will add more drag than a short rubber Mohawk.
- Color: Fluorescent Lime Green
- Size: 12" Long 3" Tall
- Applicable for: Motorcycle Helmets, Motocross Helmets, Snowmobile Helmets, ATV Helmets, and Bike Helmets
- Fast and Easy Installation with Sticky Adhesive Hook and Loop Fastener
- Helmet Hawk Brand Ships & Sold from California USA
Helmet hawks offer a little more synthetic hair, over some of their competitors. These Mohawks can have normal hair gel or spray applied to them, to give them even more character. Not that a luminous Mohawk attached to the top of a helmet needs more character.
13 possible single colors plus 1 dual-color.
Hook and loop, and adhesive.
Soft fabric synthetic hair.
12 inches long, 3 inches wide.
There are 13 wild-colors to choose from and a dual blue-green Mohawk for a bit more contrast. The soft material of the Velcro attached to the 12-inch synthetic hair that will put up with high speeds.
The base Velcro strip has adhesive, which will not damage a helmet, and is easy to remove with warm soapy water. Again, the advantage to Velcro is being able to remove the Mohawk or mix and match without applying an adhesive each time.
Soft synthetic hair that will take styling products.
Velcro quick remove strip.
Good choice of colors.
Wide, at 3 inches.
Less aerodynamic than a small rubber Mohawk.
Short, will not make it from the top to the rear of an adult helmet.
One of the best motorcycle helmet Mohawks is the Custom Taylor33™. It is more permanent, but it still more practical than the other motorcycle helmet Mohawks. And if the aim is to get noticed, you can add and remove the decals when you choose without having to buff out the adhesive. The adhesive is strong, and being single application, makes the Mohawk less susceptible to loss on the highway.
Kids will love the Raskullz Mohawk. It is a harmless bit of fun for kids that want to ride their own toy motorbikes or take a slow ride on the back of their parents’ motorcycles. And the colors will make them that much more visible to other vehicles around them.
The biggest issue with the removable types of Mohawk is the Velcro, and how good the adhesive is that holds it to the helmet. Of the two Velcro Warhawks, both are the same length and of similar width. Helmet Hawks comes across as the more durable product, and the synthetic hair seems that much more manageable.